Skip to main content

Posts

Showing posts with the label Bass Guitar

Guitar Amps

General Description


This design adopts a well established circuit topology for the power amplifier, using a single-rail supply of about 60V and capacitor-coupling for the speaker(s). The advantages for a guitar amplifier are the very simple circuitry, even for comparatively high power outputs, and a certain built-in degree of loudspeaker protection, due to capacitor C8, preventing the voltage supply to be conveyed into loudspeakers in case of output transistors' failure. The preamp is powered by the same 60V rails as the power amplifier, allowing to implement a two-transistors gain-block capable of delivering about 20V RMS output. This provides a very high input overload capability.
Features:

Sensitivity: 35mV input for 40W 8 Ohm output42mV input for 60W 4 Ohm output Frequency response: 50Hz to 20KHz -0.5dB; -1.5dB @ 40Hz; -3.5dB @ 30Hz Total harmonic distortion @ 1KHz and 8 Ohm load:Below 0.1% up to 10W; 0.2% @ 30W Total harmonic distortion @ 10KHz and 8 Ohm load: Below 0.15% up to 10W;…