Skip to main content

Posts

Showing posts from October, 2014

35 W × 4-ch amplifier circuit diagram

General Description: The AN7561Z is an audio power IC developed as the sound output of car audio (35 W by 4-ch.). A capacitor and resisitor to stop oscillation are built in between the output pin and GND so that a space saving of set is possible. Also, it incorporates a perfect muting circuit with out shock noise so that a shock noise design under the set transient condition can be made easily when used together with its standby function. In addition, it incorporates various protection circuits to protect the IC from destruction by GND-open-shortcircuit to ground and power supply surge which are the important subject of power IC protection. This IC will largely contribute to a high reliability design of the equipment. Circuit Diagram:
Datasheet for AN7560:Download

4 x 35 Watt car audio amplifier

General Description: The AN7560Z is an audio power IC developed as the sound output of car audio (35 W by 4-ch.). A capacitor and resisitor to stop oscillation are built in between the output pin and GND so that a space saving of set is possible. Also, it incorporates a perfect muting circuit with out shock noise so that a shock noise design under the set transient condition can be made easily when used together with its standby function. In addition, it incorporates various protection circuits to protect the IC from destruction by GND-open-shortcircuit to ground and power supply surge which are the important subject of power IC protection. This IC will largely contribute to a high reliability design of the equipment. Circuit Diagram: Datasheet for AN7560:Download

Headphone amplifier IC for portable equipment

General Description:
AN7531SA is an audio signal processing IC in which bass boost amplifiers, ALC circuit and beep circuit are built in the headphone amplifiers for use in portable equipment. Its headphone output block is using the center amplifier method which eliminates the need for coupling capacitor so that the circuit is most suitable for rationalization of audio circuit. 
Circuit diagram: See in datasheet



AN7516SH Audio signal processing IC for notebook PC

General Description:
AN7516SH has a speaker power amplifier, head phone power amplifier, line amplifier, electric volume, 3-dimensional Spatializer and a bass boost circuit for notebook PC. This IC adopts a small thin package, enabling compact and high integrated set.
Block Diagram:
Datasheet for AN7516SH:


1-W BTL audio power amplifier

Overview:
The AN7511 is an audio power amplifier IC with 1-ch output. The BTL (Balanced Transformer-Less) method can provide fewer external parts and more easy design for applications  Features:

1-W output (8 Ω) with supply voltage of 5 VOn-chip standby functionOn-chip muting function
Applications:

Televisions, radios, and personal computersCircuit Diagram:



Pre-amp. and power amp. IC for 1.5 V headphone stereo

Overview:
The AN7504SB is a low voltage operation headphone amp. IC for headphone C-cassette stereo. It incorporates tape selector, pre-amp. , soft AGC bass-boost circuit, etc. Features:

Low voltage operation (0.98 V to 2.0 V)Tape selector switch built-inLow frequency boost function with soft AGC
Applications:

Headphone stereoCircuit Diagram: see in datasheet

0.5W to 3W BTL audio power amplifier IC

Overview:
The AN7510/7520 series is a 0.5W to 3W BTL audio power amplifier IC. Equipped with a standby function and mute or DC volume circuit, the series includes a lineup of single and dual output models. With simplified set design due to minimum external components, this IC has a wide variety of applications. Features:

Operating power sourcs voltage: 3.0V to 13.5V.Built-in standby function.Built-in mute or DC volume circuit.Circuit Diagram:

Audio signal processing IC for 1.5 V headphone stereo

General Description: The AN7500FHQ is a single chip IC optimum for a 1.5 V headphone stereo system including pre-amp., power amp. and Dolby B type noise reduction circuit. Current consumption in a Dolby circuit off mode has been drastically reduced and an operating supply voltage has also been lowered to 0.98 V. Much fewer external components  have been realized due to an integration of audio signal processing system into a single chip circuitry in a small outline package and space saving mounting of a set. Circuit Diagram




Dual 20 Watt audio amplifier

General Description: The AN7190NK and the AN7190NZ are audio power ICs developed for the sound output of car audio (dual 20 W). It is incorporating various protective circuits to protect the IC from destruction by GND-open, short circuit to GND and power supply surge which are the important subject of power IC protection, so the IC will largely contribute to a high reliability design of equipment. Also, it is incorporating a perfect muting circuit which is free from shock noise, so that a shock noise design under the set transient condition can be made easily using together with its standby function.  Circuit Diagram:

Dual BTL 20W Audio Power Amplifier

Description:
The AN7177 is a monolithic integrated circuit designed for  Dual BTL audio power amplifier suitable for Hi-Fi and car stereo. 
Features:

 High output power (20W x 2)  Incorporating stand-by circuits  Low shock noise from power ON/OFF switching  Fewer external components  Incorporates protection circuits  Highly stable operationCircuit Diagram: Datasheet for AN7177:Download

NTE7059 Integrated Circuit Dual BTL 14W Audio Power Amplifier

General Description: The NTE7059 is an integrated circuit in a 16−Lead Staggered SIP type package designed for a 14W (13.2V, 4Ω) output power amplifier. Stereo operation is enabled due to incorporating two BTL amplifiers. High reliability is obtained due to incorporating protectors. ON/OFF is enabled even if power is supplied to the power supply pin by applying stand−by circuit.

Features: High Output Power: 14W x 2 Incorporates Protection Circuits:Temperature, Overvoltage, VOUT−GND Short, RL Short, VOUT−VCC Short Low Shock Noise from Power ON/OFF Operation Fewer External Components High Stable Operation

Dual BTL 14W Audio Power Amplifier Circuits

Overview: The AN7171NK and AN7176K are ICs for power amplification of 14W (13.2V, 4Ω) output. It can provide stereo operation since two BTL amplifiers are incorporated in achip. It incorporates various protective circuits, thus providing high reliability. The circuits can be turned on or offwith supply pins energized, because the stand-by circuit is built-in. Circuit Diagram:

BTL 17 watt audio power amplifier

Overview:
The AN7163 is an integrated circuit designed for power amplifier of 17W output with low noise and low distortion, and it suits TV set with multi-sound. Stereo operation is enabled due to incorporating two amplifiers on one chip. 12-pin SIL package enabled compact and high-densely mounted set. 
Circuit diagram:
Datasheet for AN7163:

20W Audio Power Amplifier Circuit

Description: The NTE7011 is an integrated circuit in a 12−Lead SIP type package designed for use as a BTL power amplifier with built−in headphone amp for portable stereo applications. Typical applications include portable component stereos, car stereo, radio cassette recorders, and TV sound multiplex output.
Features:  Low Quiescent Current, Low Distortion, Low Noise, High Output Power Wide Supply Voltage range: VCC = 6 to 26V Built−In Muting Circuit Built−In Protection Circuits:Temperature, Surge, Overcurrent Built−In Headphone Amplifier Circuit


20 watt BTL High Audio Power Amplifier

General Descripton: The AN7161 is a monolithic integrated circuit designed for BTL audio high power amplifier with buikt-in headphone ampliifer. It can be widely applicable to Hi-Fi car stereo and TV sound multiplex output. Circuit Diagam: Datasheet for AN7161:



Dual Audio Power Amplifier Circuit, 7.5W

Description:
The NTE1373 is an integrated circuit designed for use as a 7.5W (16W, 4Ω) power amplifier output with low noise and low distortion suitable for TV sets with multi−sound. Stereo operation is possible due to incorporating two amplifiers on one 12−Lead SIP type chip. Features: Built−In Protection Circuits (Surge, Thermal Protection, etc.) Automatic Operating Point Stabilizer Circuit Low Distortion, Low 1/f Noise Low Shock Noise from Power ON/OFF Operation Better Channel Separation Few External Components Required

Dual Audio Power Amp 5.3W/Ch. NTE1371

Features:
Built−in Protector Circuits (for surge and thermal, etc.)
Built−in Automatic Operating Point Stabilized Circuit
Low Distortion, Low L/F Noise
Small Transient Nosie at Power ON/OFF Switching
Good Channel Separation
Few External Components

Pin connection:

Supply Voltage (Note 1), VCC . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V
Peak Supply Voltage (Note 2), VSURGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40V
Total Current, ICC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4A
Power Dissipation (TA = +30°C), PD . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30W
Operating Temperature, Topr . . . . . . . .  . . . . . . . . . . . . . . . . . . . . . . . . . . . . −30° to +75°C

Storage Temperature Range, Tstg . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . −55° to +150°C

AN7158N Dual 7.5W Audio Power Amplifier Circuit

Overview
The AN7158N is an integrated circuit designed for power amplifier of 7.5W (16V, 4Ω) output with low noise and low distortion, and it suits TV set with multi-sound. Stereo operation is enabled due to incorporating two amplifiers on one chip. 12-pin SIL package enabled compact and high-densely mounted set. 
Circuit Diagram:



Datasheet AN7158N:

Top 5 Online Circuit Simulator for Electronic Components

PARTSIM
http://www.partsim.com


SPICE SimulatorAC/DC/Transient SimsWaveform Viewer
Simulation Features- PartSim includes a full SPICE simulation engine, web-based schematic capture tool, and a graphical waveform viewer. 
Browse Examples - Try out a sample simulation and see PartSim in action. No registration is required. Browse Examples
Digi-Key Integration - PartSim includes an integrated Bill-Of-Materials manager that lets you assign Digi-Key Part Numbers to your models. CIRCUITLAB
https://www.circuitlab.com/ Choosing the right design tools makes your job easier.Design with our easy-to-use schematic editor.Accurate analog & digital circuit simulations in seconds.Professional schematic PDFs, wiring diagrams, and plots.No installation required -- try it instantly.DOCIRCUITS http://www.docircuits.com Build Circuits -Have fun building and burning circuitsOver 541238 SimulationsShare - Your Design with communityTest & Measure - With real lab equipments Easier EDA http://easyeda.com/ Over 77,4…

100W Subwoofer Amplifier Circuit

Description for Subwoofer Amplifier Circuit: This is a circuit diagram designed with transitors, designed specially for subwoofer amplifiers, and can produce a power output 100W. 
Circuit diagram for  Subwoofer Amplifier Circuit:

40 Watt Audio Amplifier Circuit

General Description The TA8277H is 4 ch BTL audio power amplifier for car audio  application.  This IC can generate more high power: POUTMAX = 43 W as it  is included the pure complementary PNP and NPN transistor  output stage.  It is designed low distortion ratio for 4 ch BTL audio power  amplifier, built-in stand-by function and muting function.  Additionally, the AUX amplifier and various kind of protector  for car audio use is built-in. Circuit Diagram: Datasheet for TA8277:Download

35 W BTL x 4 ch Audio Power IC

General Description: The TA8276H is 4 ch BTL audio power amplifier for car audio application. This IC can generate more high power: POUTMAX = 35 W as it is included the pure complementary PNP and NPN transistor output stage. It is designed low distortion ratio for 4 ch BTL audio power amplifier, built-in stand-by function, muting function, output clipping detection and diagnosis circuit which can detect output to VCC/GND short and over voltage input mode. Additionally, the AUX amplifier and various kind of protector for car audio use are built-in.  Circuit Diagram: Datasheet for TA8276:Download

47 Watt BTL Audio Power Amplifier 4-channel

General Description: The TA8273H is 4 ch BTL audio power amplifier for car audio  application.  This IC can generate more high power: POUTMAX = 47 W as it  is included the pure complementary PNP and NPN transistor  output stage.  It is designed low distortion ratio for 4 ch BTL audio power  amplifier, built-in stand-by function, muting function, and  diagnosis circuit which can detect output to VCC/GND short,  output offset voltage and over voltage input mode. Additionally, the AUX amplifier and various kind of protector  for car audio use are built-in.  Circuit Diagram: Datasheet for TDA8273: Download

43 Watt Audio Power Amplifier

General Description: The TA8263BH is 4 ch BTL audio power amplifier for car audio  application.  This IC can generate more high power: POUTMAX = 43 W as it  is included the pure complementary PNP and NPN transistor output stage.  It is designed low distortion ratio for 4 ch BTL audio power amplifier, built-in stand-by function, muting function, and diagnosis circuit which can detect output to VCC/GND short, output offset voltage and over voltage input mode. Additionally, the AUX amplifier and various kind of protector  for car audio use are built-in.  Circuit diagram:
Datasheet for TDA8263: Download

40 W BTL x 4CH Audio Power IC

General Description: The TA8260AH is 4 ch BTL audio power amplifier for car audio  application.  This IC can generate more high power: POUT MAX = 40 W as it is  included the pure complementary PNP and NPN transistor  output stage.  It is designed low distortion ratio for 4 ch BTL audio power  amplifier, built-in Stand-by Function, Muting Function, Clip  detector, and diagnosis circuit.  Additionally, the AUX. amplifier is built-in, it can make the beep  signal etc. output to 2 channels (OUT1 and 4).  It contains various kind of protectors for car audio use.  Circuit Diagram: Datasheet for TDA8260AH:Download

200W Power Audio Amplifier

Circuit Diagram:
Datasheet for STK4050: Download

100W AF Power Amplifier

Circuit Diagram:
Datasheet for STK4044: Download

25W AF Power Amp

Genereal Description: STK4017 fabricated on the IMST substrate of our own originality and designed for use in intermediate-power, single-channel, voltage amplifiers. Their packages are made much more compact than those of tje Type Nos. heretofore in use,  thereby meeting the requirements for making  the set smaller and slimmer.  Circuit diagram:
Datasheet for STK4017: Download

70W AF power amp STK086G

Features:


Maxim supply voltage: +Vcc: 55VColector current: Icmax: 7 ALoad Resistance: RL: 8 Ohm

Circuit Diagram:

50W Power Amplifier

Circuit Diagram:Part list:

Monolitic IF amplifier

General Description:
The MC1350 is an integrated circuit featuring wide range AGC for use as an IF amplifier in radio and TV over an operating temperature range of 0° to +75°C.

Power Gain: 50 dB Typ at 45 MHZ Power Gain: 50 dB Typ at 58 MHZAGC Range: 60 dB Min, DC to 45 MHzNearly Constant Input & Output Admittance over the Entire AGC RangeY21 Constant ( –3.0 dB) to 90 MHzLow Reverse Transfer Admittance: < < 1.0 µmho Typ12 V Operation, Single–Polarity Power SupplyCircuit Diagram: Datasheet for MC1350: Download

DIGITAL ECHO DIGITAL DELAY

The M65831A is an IC developed for producing echo effects added to voice signals picked up by microphone for karaoke applications. The IC has the largest memory among the digital delay series. As it’s design is aimed at high performance, it is best suited to provide radio cassette tape recorders and miniature unit audio system with quality echo function. Being pin compatible with the M65830CP / FP and M65843AP / FP, the M65831AP / FP is suitable for upgrading the series.
Circuit diagram: Datasheet for M65831A: Download

High Speed Operational Amplifier LM6161

Circuit diagram:

Datasheet for LM6161/LM6261/LM6361: Download

Integrated Audio Amplifier System LM4851

Circuit diagram:

Datasheet for LM4851: Download

100 watt LM391 Audio Power Driver

Circuit diagram:

Datasheet for LM391: Download

High-Performance 68W Audio Power Amplifier LM3886

Circuit diagram:

Datasheet for LM3886: Download

56W Audio Power Amplifier

Circuit diagram:Datasheet for LM3876: Download

Low Voltage Audio Power Amplifier LM386

Circuit diagram:
Datasheet for LM386: Download

Audio Power Amplifier LM380

Circuit diagram:
Datasheet for LM380: Download

LA4558 2-Channel AF Power Amplifier

Circuit diagram:
Datasheet for LA4558: Download

5.3W 2-Channel AF Power Amplifier

Datasheet for LA4500: Download

12W AF Power Amplifier for Car Radio

Datasheet for LA4460N: Download

5.5W 2-Channel AF Power Amplifier

Features

Dual channels.Output : 5.5W×2 (typ.)Low pop noise at the time of power supply ON/OFF and good starting balance.Good ripple rejection : 46dB (typ.)Good channel separation.Low residual noise (Rg=0).On-chip protectors.
 - Thermal protector
 - Overvoltage/surge protector
 - Adjacent pins (7-8, 6-7) short protector

Circuit Diagram:
Datasheet for LA4446: Download

2-Channel Preamplifier For Car Stereo LA3160

Features:

Two preamplifiers on chip.Fewer peripheral parts.Low noise.8-pin SIP package facilitating easy mounting.Circuit Diagram:
Datasheet for  LA3160: Download



20W Audio Power Amplifier

Circuit diagram:
Datasheet for HA1397: Download

4-channel 37 Watt amplifier circuit

The HA13159 is four-channel BTL amplifier IC designed for car audio, featuring high output and low distortion, and applicable to digital audio equipment. It provides 37 W output per channel, with a 13.7 V power supply and at Max distortion. Circuit diagram:
Datasheet for HA13159: Download