Skip to main content

Proteus VSM Software

The most powerful CAD system, allowing virtually simulate work a huge amount of analog and digital devices.
Proteus VSM software package allows you to build a scheme of any electronic device and simulate its performance, identifying mistakes made at the design stage and tracing. The program consists of two modules. ISIS - Editor of electronic circuits, followed by imitation of their work. ARES - editor PCB autorouter equipped Electra, built-in editor libraries and automatic placement of components on the board. Besides ARES can create a three-dimensional model of the PCB.
Proteus VSM includes more than 6,000 electronic components with all reference data, as well as demonstration projects study. The program has the tools and USBCONN COMPIM, which allow you to connect virtual device to the USB port and the computer COM. When connecting to these ports any external device virtual circuit will work with it as if it existed in reality. Proteus VSM supports the following compilers: CodeVisionAVR and WinAVR (AVR), ICC (AVR, ARM7, Motorola), HiTECH (8051, PIC Microchip) and Keil (8051, ARM). You can export models of electronic components from the program PSpice.

 Despite the fact that the program works with devices consisting of several microcontrollers and even with chips from different manufacturers in a single device, you must clearly understand that the simulation replicates the real work schemes are not exactly! To avoid errors, you need a clear idea of ​​the final result.
Proteus VSM is a commercial product. There is a free demo version. It has all the features and capabilities of pay package, but you can not save or print the result of the work to create your own microcontroller.
English-language program menu. Complete localization system for Proteus VSM not. You must install the program in a folder without Cyrillic characters in the title.

Operating systems, which employ this CAD - is Windows 2000 / XP / Vista / 7. Note that Proteus VSM functional in Windows 7, but starting with version 7.8.
Distribution of the program: Shareware (fee required), the price - from £ 99
Official site of Proteus: http://www.labcenter.com

Comments

Popular posts from this blog

200W Subwoofer Amplifier Circuit

Circuit Description
Here is a circuit that uses a mosfet amplifier amplicable for subwoofer as the main booster, or the basis of this boosterAmplifier. Circuit which uses MOSFET Power Amplifier is powered by the output more than 200W Speaker 8 Ohm impedance. We also include a suitable power supply circuit with the use of MOSFETamplifier with 200W of power, not only of his course Schematic diagram for the layout design is also already there.
Amplifier Circuit Diagram
200W Mosfet Amplifier LAyout PCB
Regulator Circuit Diagram MOSFET AMPLIFIER Regulator PCB MOSFET amplifier

TDA7294 Audio Amplifier 2 x 80W

TDA7294 general description:
This circuit described here uses two cis tda 7294 for use in stereo (2 x 80Watts) or bridge mode (1x 180 Watts), to configure this setting just four jumpers. To facilitate mounting the circuit has power supply attached. The power is kind of simple symmetrical with a bridge rectifier 6A, and two large electrolytic capacitors , 10000μF the 22000μF/50v. This Power supply will for the two modules. The processor is recommended 22-0-22 to 28-0-28 / 5A, depending on the quality of the transformer is recommended at least 6 amps of current.


TDA7294 features:
High power performances with limited supply voltage level.Considerably high output power even with high load values (i.e. 16 Ohm).Rl= 8 Ohm, Vs = ±25V Pmax = 150 WRl=16Ohm, Vs = ±35V 
TDA7294 circuit diagram:

TDA7294 layout:TDA7294 pcb:

Datasheet for TDA7294:Download
Searches related to TDA7294 Audio Amplifier Circuits tda7294 bridge amplifier circuit ic tda7294 subwoofer tda7294 subwoofer schematic tda7294 single suppl…

TDA2030 Audio Amplifier 1 x40W

TDA2030 general description:    Although there are a number of hybrid output modules on the market, very few of them combine compactness with reasonable price and good performance. One of these few is SGS's used in the present amplifier. The design of the amplifier is straightforward: a power op-amp followed by two output transistors. The audio signal is applied to the non-inverting input of power op-amp IC1 TDA2030 via socket K1 and capacitor C1. The supply current to the IC varies in accordance with the input signal. Consequently, there will be a similarly varying voltage drop across resistors R6, R7, R8, and R9 since these are in the supply lines to the op-amp. As long as the current is lower than about 1A, the voltage drop across the resistors will be insufficient to switch on transistors T1 and T2. This means that outputs up to 2 W into 4 ohm are provided entirely by the op-amp. Once the output current exceeds a level of 1A, the transistors are on and contribute to the power …